Goole valve co.,Ltd

Products

Contact

Yongjia Goole Valve Co.,Ltd

Address:  He yi Industrial Zone,Oubei Town,Wenzhou City,Zhejiang Province,P.R.China
Tel: 86-577- 57789960

FaxL86-577-57789962

Email:goole2@goolevalve.com

Web: www.chinavalve2.com

Position: Home > Products > Steam Trap
Steam Trap

inverted bucket steam trap

inverted bucket steam trap
inverted bucket steam trap

Detailed

88X Inverted Bucket Steam Trap

 
Brief Introduction.
 
Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.
 
Working Principle


The design makes use of the working principle of difference in density of steam and condensate. The compound lever is connected to the inverted bucket inside the valve,working on steam pressure switch.The inverted bucket is a level sensor in the steam trap with opening downward.When the device starts up ,air and low-temperature condensate enter into the tube.At this time ,the trap is completely open,allowing quick discharge of air and low-temperature condensate and temperature rising. Steam entering into the inverted bucket causes it to float.and the lever arm drives the valve corce to close. A small vent in the bucket may automatically discharge the air.Some part of the steam will be discharged from the vent ,and other part of the steam will become condensate.The inverted bucket will sink without buoyant force, and then the lever arm will help the valve core to open the valve. When the valve is open, steam will get into the bucket again,causing the valve to close again. The device will work circularly and discharge water discontinuously.


Structural Characteristic 


Inverted bucket type steam trap,as amechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.It applies stainless steel internal components and heat treatable steel base . It has such features as strong structure,resistance to abrasion and corrosion, long durability, and not easy to be damaged. It is highly recommended to be used for condensate recovery sustem for its steam saving capability, High heat engine efficiency, and anti-back pressure characteristic. The trap may be assembled with check valve so as to save piping space.
 
Field of Application.
 
Product Name:88X Inverted Bucket Steam Trap.
Pressure Rating: 1.6- 4.0 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: cast steel.
Standard Flanges: DIN, ANSI, JIS, JB79.
Standard Screwed: NPT,BSP.
 
 
 Material of Main Component.

 

Name of component

Material of component

Valve body, valve cover

WCB

Internal components

stainless steel

Valve body, valve cover

WCB

Internal components

stainless steel

 
Main External Dimensions.

 

 

 

 
 
 
 
Thread

Model

DN

A

C

D

B

Maximum pressure kg/cm 2

880

1/2 '' 3/4 ''

96

128

70

146

25

881

1/2 '' 3/4 '' 1 ''

96

128

100

176

41

882

3/4 '' 1 ''

145

170

137

231

25

883

1 '' 1 1/4''

180

202

193

313

25

884

1 1/4' 1 1/2''

203

232

212

362

25

885

1 1/2'' 2 ''

220

250

248

396

25

 

 
 
Flange

Model

DN

A

C

D

B

Maximum pressure kg/cm 2

881F

15. 20 .25

96

170

100

176

25

882F

20 .25

145

210

137

131

41

883F

25 .32

180

270

193

314

25

884F

32 .40

203

320

212

362

25

885F

40 .50

220

320

248

396

25

886F

65 .80

265

400

310

799

25

 

Hits:  UpdateTime:2017-09-13 09:06:51  【Printing】  【Close
Online 
Mr Ellison Mr Ellison
Email to us
Feedback